Back to top Share via Share via... Twitter LinkedIn Facebook WhatsAppSend via e-MailPrintPermalink × Data Collection By using SMX-RNS modules, you can collect data from your machines as shown in the diagram. As in the example, you can easily access your devices by bridging all your machine PLC and/or HMI IPs with the SMX-RNS module. SMX-RNS's WAN IP address must be entered in order to access the machine PLC on the SCADA or OPC side. Bridge Mode must be activated. This can be done from the web interface of the SMX-RNS module. When Bridge Mode is activated, PLC or HMI IP address must be entered. Brochure